Cortex VEXnet Manuel d'instructions télécharger pdf (Page 20)

ROBOTC

Firmware Inspection - Using IFI Loader • 4

2010 Carnegie Mellon Robotics Academy / For use with VEX Robotics Systems

5.PowerCycletheVEXMicrocontroller

Flip the small switch on your VEX Microcontroller

to turn your robot on. If it is already on, turn it off,

and then back on.

5. Once the Terminal Window is open, turn the VEX Microcontroller on. If it is already turned

on, turn it off, and then back on.

6. The Terminal Window will display both the master and ROBOTC user rmware.

The VEX Master rmware version should be at least 10.

The ROBOTC User rmware version should be at least 7.97.

Note: If either rmware is out of date, they can be downloaded using ROBOTC by going to the

Robot menu and selecting Download Firmare for the ROBOTC rmware, or Download IFI Master

Firmware for the master rmware.

If you download the master rmware, you must also download the ROBOTC rmware. After

downloading rmware, you must also re-download the user program to the VEX Microcontroller.

Firmware Inspection Using IFI Loader (cont.)

VEX ROBOTICS COMPETITION

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 94 95

Pas de commentaire

Cortex VEXnet Manuel d'instructions Page 20