Cortex VEXnet Manuel d'instructions télécharger pdf (Page 80)

ROBOTC

VEXnet Upgrade Installation • 10

Carnegie Mellon Robotics Academy / For use with VEX

Robotics Systems

Setup

3a.TurnontheTransmitterVEXnetUpgrade

Slide the POWER switch of the VEXnet Upgrade to

the ON position. Do NOT power the Microcontroller

VEXnet Upgrade. Power from the Transmitter will turn

on the Microcontroller VEXnet Upgrade.

3. Turn on the Transmitter VEXnet Upgrade and allow them to pair.

VEXnet Upgrade Installation Instructions (cont.)

3b.AllowtheVEXnetUpgradestoPair

The ROBOT and VEXnet status lights will blink

yellow and red. When both lights turn green,

the Transmitter and Microcontroller VEXnet

Upgrades have successfully paired.

4. Remove the USB cable from the VEXnet Upgrades and replace both USB adapters.

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 94 95

Pas de commentaire

Cortex VEXnet Manuel d'instructions Page 80